Titronic 300 - 20 ml Dosiereinheit TZ 3130
Skip image gallery
Picture similar to product
Product information "Titronic 300 - 20 ml Dosiereinheit TZ 3130"
Module 1: Basic unit with ready-to-use 20 ml TZ 3130 dosing unit with tubing, screw connections, and titration tip, TZ 3880 hand switch, Z 305 titration clamp, TZ 1748 stand rod, and 100-240 V power supply
The TITRONIC® 300 is a piston burette and is suitable for the following applications:
Manual titrations with or without calculation of the result
Dosing
Use as a dosing burette with the TitroLine® 7750 titrator
Use as a dosing or titration burette in combination with the TitriSoft control software from version 3.1 onwards.
Different dosing and filling speeds can be set for each method.
Up to 3 user methods can be stored in the device.
Solutions that can be used are:
Practically all liquids and solutions with a viscosity <, = 10 mm² / s, such as concentrated sulfuric acid, can be used.
However, chemicals that attack glass, PTFE, or FEP or are explosive, such as hydrofluoric acid, sodium azide, and bromine, must not be used! Suspensions with a high solids content can clog or damage the dosing system.
The TITRONIC® 300 is a piston burette and is suitable for the following applications:
Manual titrations with or without calculation of the result
Dosing
Use as a dosing burette with the TitroLine® 7750 titrator
Use as a dosing or titration burette in combination with the TitriSoft control software from version 3.1 onwards.
Different dosing and filling speeds can be set for each method.
Up to 3 user methods can be stored in the device.
Solutions that can be used are:
Practically all liquids and solutions with a viscosity <, = 10 mm² / s, such as concentrated sulfuric acid, can be used.
However, chemicals that attack glass, PTFE, or FEP or are explosive, such as hydrofluoric acid, sodium azide, and bromine, must not be used! Suspensions with a high solids content can clog or damage the dosing system.