New equipment

Space-saving compact designRemote control with RS232C/RS485 protocols PropertyVA-21-601VA-21-602VA-21-603VA-21-604VA-21-605VA-21-606VA-21-607VA-21-608 Type6-port Path Position Max Pressure40 MPa (5800 psi)30 MPa (4350 psi)40 MPa (5800 psi)30 MPa (4350 psi)20 MPa (2900 psi)20 MPa (2900 psi)5 MPa (725 psi)5 MPa (725 psi) Wetted materialsSUS, PEEKPEEKSUS, PEEKPEEKSUS, PEEKPEEK Tube OD1/16″3.0 mm or 1/8″ Thread sizeNo.10-32UNFM8×1.25 Path diameter0.25 mm (0.01″)0.5 mm (0.02″)1.0 mm (0.04″)2 mm (0.079″) PropertyVA-21-609VA-21-610VA-21-611VA-21-612VA-21-613VA-21-614 Type4-port1-2 port (3-way valve) Path Position Max Pressure40 MPa (5800 psi)40 MPa (5800 psi)30 MPa (4350 psi)5 MPa (725 psi) Wetted materialsSUS, PEEKPEEKSUS, PEEKPEEKSUS, PEEKPEEK Tube OD1/16″3.0 mm or 1/8″3.0 mm or 1/8″3.0 mm or 1/8″ Thread sizeNo.10-32UNFM8×1.25M8×1.25M8×1.25 Path diameter0.5 mm (0.02″)2 mm (0.079″)2 mm (0.079″)2 mm (0.079″) PropertyVA-21-615VA-21-616VA-21-617VA-21-618VA-21-619VA-21-620VA-21-621VA-21-622 Type1-4 port rotary1-6 port rotary1-12 port rotary Path Position Max Pressure40 MPa (5800 psi)30 MPa (4350 psi)40 MPa (5800 psi)30 MPa (4350 psi)5 MPa (725 psi)5 MPa (725 psi)20 MPa (2900 psi) Wetted materialsSUS, PEEKPEEKSUS, PEEKPEEKSUS, PEEKPEEKSUS, PEEKPEEK Tube OD1/16″3.0 mm or 1/8″1/16″ Thread sizeNo.10-32UNFM8×1.25No.10-32UNF Path diameter0.5 mm (0.02″)2 mm (0.079″)0.5 mm (0.02″)

Variants from €1,460.00*

€1,875.00*

FLOM Attachment Panel for V200 Series

The valve shown in the picture is not included in the scope of delivery and must be ordered separately under item no. FL-V200.

€75.00*

FLOM Auto Back Pressure Regulator Auto Back for the UI-22 Series with automatic pressure regulation

Material: SS

FeaturesProvide consistent pressure by tracking variable pump pressure in real timeUI Series provides stable flow, BP-11 maintains set pressure Part numberBP-11SBP-11D Wetted materialsSUS , PFAPCTFE , PFA Path diameter0.6 mm Pressure range0.10 - 5.00 MPa (14.5 - 725 psi) Flow rate range0.1 - 100 mL/mi Pressure range*10.5 - 5.00 MPa (72.5 - 725 psi) Pressure accuracy±,0.1 MPa (±,14.5 psi) Pressure signal rangeuses pressure signal from UI-22 [ DC1 - 5V ] FeaturesSet volume dispensing*3, Set volume dispensing*4, Upper/lower pressure limiters CommunicationRS232C, RS485 (START-IN, READY-OUT) Dimensions144 (H) ×, 79 (W) ×, 240 (D) mm, excluding protuberances WeightApprox. 2.7 kg PowerAC100 - 240 V (50 / 60 Hz) MAX 70 VA *1: Using distilled water or methanol, pressure 0.5~5.0MPa / flow rate 0.1~50.0mL/min are controllable.※: please contact us if you need flow rates outside 0.1~50.0mL/mi.

€3,200.00*

FLOM Dual-Fitt set

Super High Pressure Fittings (No.10-32 UNF, rated to 140 MPa)The matching ferrules for this set are separately available in 10/pack under product no. FL-9623-10.

€110.00*

FLOM Dual-Fitting

Super High Pressure Fittings (No.10-32 UNF, rated to 140 MPa)

€50.00*

FLOM Easy Fitt, OD 10 mm

Medium Pressure Fittings (10-pack) 10-32 UNF, rated 20 - 40 MPa

€50.00*

FLOM Gastorr BG Series 2 Channels 510 µL

Channel: 2 | Internal volume: 510 μL

Pick the model with the right internal volume for your applicationAuto cleaning function prevents vacuum pump deteriorationCPU control achieves stable degassingIndependent chamber design prevents solvent contaminationChoose from 2 channel or 4 channel configurationsReal time display of vacuum level

€1,750.00*

FLOM Gastorr PG Series 1 Channel

Channel: 1

Features• Flow rates up to a max of 50 mL/min• Auto cleaning function prevents vacuum pump deterioration• CPU control achieves stable degassing• Real time display of vacuum level• Independent chamber design prevents solvent contamination• Choose from 1 channel or 2 channel configurations Product NumberPG-41PPG-42P Channels12 Internal volume62.0 mL Flow rate≦ 50 mL/min Vacuum range150 hPa Thread size1/4-28 UNF Wetted MaterialPEEK, PTFE, ETFE, PEEK Remote controlInput: - Output: Error signal Dimensions180 (H) × 90 (W) × 400 (D) mm, excluding protuberances WeightApprox. 5.0 kgApprox. 6.0 kg PowerAC 100 - 240 V (50 / 60 Hz) MAX 80 VA

€3,000.00*

FLOM Hex Fitt Medium Pressure Fittings (10/pack)

Medium Pressure Fittings (10-pack) 10-32 UNF, rated 20 - 40 MPa

€50.00*

FLOM Hex Fitt Mini Medium Pressure Fittings (10-pack)

€50.00*

FLOM High Pressure Damper PEEK/PTFE, 20 MPa (2900 psi)

FeaturesPart number: 9810Max pressure: 20 MPa (2900 psi)Pulse control range: 8-12 MPa (1160-1740 psi)Internal volume: Approx. 3.5 mLWetter material PEEK, PTFEThread size: No.10-32 UNFDimensions: ø 50mm × 36.5(D)mmWeight: Approx. 0.3 kgOrder Code: PDM-F001

€540.00*

FLOM Injector Panel

The valve shown in the picture is not included and must be purchased separately.This cannot be attached to FLOM pumps.

€75.00*

FLOM Intelligent Micro pump

Intelligent Micro Pump MP-22Valve Switching Micro PumpCheck valve-less design for super low pulse control under low flow ratesFeaturesImproved near-zero pulse flowProblems with bubble greatly reducedEasy setupUpper and lower pressure limitersSpace-saving compact designExternal control available with RS232C protocol Part numberMP-22-110S Pumphead materialSUS Max pressure*35 MPa (5075 psi) Flow rate range**0.001 - 9.999 mL/min Flow per stroke80 µL Plunger stroke10 mm Flow accuracy***< 0.3 % FeaturesActive pulse reduction, upper/lower pressure limiters Pressure accuracy< 5 % Wetted materialsSapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK, SUS Remote controlInput:PUMP ON / OFF, Output:Error signal CommunicationRS232C, RS485(between FLOM devices) Dimensions150 (H) ×, 160 (W) ×, 280 (D) mm, excluding protuberances WeightApprox. 6.7 kg PowerAC100 - 240 V (50 / 60 Hz) MAX 140 VA *: Maximum pressure is only sustained intermittently.**: Maximum output is not sustainable over long periods of time.***: Using Methanol at flow rate10~500&mu,L/min , output pressure >, 1 MPa ~ 20MPa

€7,900.00*

FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series

Material: PEEK | Max. Flow Rate: 10 mL/min. | Max. Pressure: 20 MPa / 2900 psi

This intelligent pump of the UI-22 series is now being replaced by the intelligent pump of the UI-32 series. However, spare parts for the UI-22 series are still available.FeaturesPulses reduced to absolute minimum making low flow rate pumping possibleBubble problems greatly reducedLong life plunger sealUpper and lower pressure limitersSpace-saving compact designControl with RS232C protocolChoose SUS, PEEK, or PCTFE to fit your solvent Part numberUI-22-110SUI-22-110PUI-22-110DUI-22-410SUI-22-410PUI-22-410D Pumphead materialSUSPEEKPCTFESUSPEEKPCTFE Max pressure*35 MPa (5075 psi)20 MPa (2900 psi)2 MPa (290 psi)5 MPa (725 psi)5 MPa (725 psi)2 MPa (290 psi) Flow rate range**0.001 - 9.999 mL/min0.01 - 99.99 mL/min Flow per stroke80 μL708 μL Plunger stroke10 mm Flow accuracy<, 0.3 % FeaturesActive pulse reduction, upper/lower pressure limiters Pressure accuracy<, 5 % Wetted materialsSUS: Sapphire, Ruby, PTFE, PCTFE, PFA, FFKM, HDPE, PEEK, SUS PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK PCTFE: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM Remote controlInput:PUMP ON / OFF, Output:Error signal CommunicationRS232C , RS485(between FLOM devices) Dimensions144 (H) × 105 (W) × 240 (D) mm, excluding protuberances WeightApprox. 5.6 kg PowerAC100 - 240 V(50 / 60 Hz) MAX140 VA *: Maximum pressure is only sustained intermittently.**: Maximum output is not sustainable over long periods of time.

€4,300.00*

FLOM Low Pressure Damper

Part number: 9800Max pressure: 2 MPa (290 psi)Pulse control range: 0.1~0.7 MPa (14.5-101.5 psi)Internal volume: Approx. 0.8 mLWetter material: PEEK, FEPThread size: No.10-32 UNFDimensions: φ45mm × 33(D)mmWeight: Approx. 0.3 kgOrder Code: PDM-F002

€540.00*

FLOM Manual Sample Injector for HPLC, UHPLC systems

Manual injectors in a new design, offering high sample repeatability and a convenient injection handle, in an easy to install, easy to maintain package.High Performance Manual Injectors Offering high sample repeatability, a convenient injection handle, in an easy to install, easy to maintain package. The PEEK rotor seal provides unparalleled solventresistance.The use of PEEK material in the rotor seal gives this injector excellent solvent resistance. Resists deterioration even with alkaline solvent. (Option: Vespel).The compact injection marker is built into the unit . Solvent resistance enhanced by the use of a teflon membrane lead line.The VI-13 features completely inert connection matrials, and comes with a standard PEEK/Teflon syringe needle. Best for ionic materials and protein analysis.The special bypass built into the valve absorbs the pressure shock generated during path switching, protecting the column from possible deterioration resulting from sudden high pressures. Product nameManual Sample Injector VI Series Part NumberVI-11VI-12 Max Pressure（MPa）35MPa35MPa Wetted MaterialSUS, PEEK, CeramicCeramic, PEEK Tube OD1/161/16 Path Diameter0.5mm (0.02")0.5mm (0.02") Port Thread SizeNO.10-32UNFNO.10-32UNF Sample Loop Included20μL (SUS,1/16")20μL (SUS,1/16") Injection MarkerInternal (1.5 lead length)Internal (1.5 lead length)

€700.00*

FLOM Manual Sample Injector for HPLC, UHPLC systems

Manual injectors in a new design, offering high sample repeatability and a convenient injection handle, in an easy to install, easy to maintain package.High Performance Manual Injectors Offering high sample repeatability, a convenient injection handle, in an easy to install, easy to maintain package. The PEEK rotor seal provides unparalleled solvent resistance.The use of PEEK material in the rotor seal gives this injector excellent solvent resistance. Resists deterioration even with alkaline solvent. (Option: Vespel).The compact injection marker is built into the unit . Solvent resistance enhanced by the use of a teflon membrane lead line.The VI-13 features completely inert connection matrials, and comes with a standard PEEK/Teflon syringe needle. Best for ionic materials and protein analysis.The special bypass built into the valve absorbs the pressure shock generated during path switching, protecting the column from possible deterioration resulting from sudden high pressures. Product nameManual Sample Injector VI Series Part NumberVI-11VI-12 Max Pressure（MPa）35MPa35MPa Wetted MaterialSUS,PEEK,CeramicCeramic,PEEK Tube OD1/161/16 Path Diameter0.5mm(0.02")0.5mm(0.02") Port Thread SizeNO.10-32UNFNO.10-32UNF Sample Loop Included20μL(SUS,1/16")20μL(SUS,1/16") Injection MarkerInternal (1.5 lead length)Internal (1.5 lead length)

€625.00*

Flom Manual Valve, 1-2 port rotary for HPLC, UHPLC systems

Manual Valves for LC applications in an extremely small footprint with supersmall high performance Ods of 25mm and 30mm. Connectors and controls on the front face for easy installation and access. Wetted material is inert PEEK. Part NumberV200V201V204V512V239 Application6 port analyticalPath Selection2 port selector Max Pressure (MPa)20MPa30MPa(low pressure) Wetted MaterialPEEKSUS, PEEKPEEK Tube OD1/16"3mm Path Diameter0.6mm(0.024")0.8mm(0.03")1.0mm(0.04")

€475.00*

FLOM Manual Valve, 1-2 port rotary for HPLC, UHPLC systems

€325.00*

FLOM Manual Valve, 1-2 port rotary für HPLC, UHPLC systems

€190.00*

FLOM Manual Valve, 3 port 2 way for HPLC, UHPLC systems

€240.00*

FLOM Manual Valve, 6 port 2 position

A convenient manual valve for switching between flow paths.FeaturesLow torque design for easy switchingMaximum pressure 35MPa (5075 psi) Product NameManual Switching Valve Product NumberV05 TypeAnalytical 6-port Path position Max pressure35 MPa (5075 psi) Wetted materialSUS , PEEK Tube OD1/16” Path diameter0.6 mm (0.024”) Thread sizeNo.10-32 UNF Order CodeVH-V05

€550.00*