Skip to main content Skip to search Skip to main navigation

FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series

Product information "FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series"

This intelligent pump of the UI-22 series is now being replaced by the intelligent pump of the UI-32 series. However, spare parts for the UI-22 series are still available.
Features

  • Pulses reduced to absolute minimum making low flow rate pumping possible
  • Bubble problems greatly reduced
  • Long life plunger seal
  • Upper and lower pressure limiters
  • Space-saving compact design
  • Control with RS232C protocol
  • Choose SUS, PEEK, or PCTFE to fit your solvent
     
    Part numberUI-22-110SUI-22-110PUI-22-110DUI-22-410SUI-22-410PUI-22-410D
    Pumphead materialSUSPEEKPCTFESUSPEEKPCTFE
    Max pressure*35 MPa (5075 psi)20 MPa (2900 psi)2 MPa (290 psi)5 MPa (725 psi)5 MPa (725 psi)2 MPa (290 psi)
    Flow rate range**0.001 - 9.999 mL/min0.01 - 99.99 mL/min
    Flow per stroke80 μL708 μL
    Plunger stroke10 mm
    Flow accuracy<, 0.3 %
    FeaturesActive pulse reduction, upper/lower pressure limiters
    Pressure accuracy<, 5 %
    Wetted materialsSUS: Sapphire, Ruby, PTFE, PCTFE, PFA, FFKM, HDPE, PEEK, SUS
    PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK
    PCTFE: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM
    Remote controlInput:PUMP ON / OFF, Output:Error signal
    CommunicationRS232C , RS485(between FLOM devices)
    Dimensions144 (H) × 105 (W) × 240 (D) mm, excluding protuberances
    WeightApprox. 5.6 kg
    PowerAC100 - 240 V(50 / 60 Hz) MAX140 VA

    *: Maximum pressure is only sustained intermittently.
    **: Maximum output is not sustainable over long periods of time.

Properties "FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series"
Material: PEEK
Max. Flow Rate: 10 mL/min., 10 mL/min.
Max. Pressure: 20 MPa / 2900 psi