FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series
Skip image gallery
Picture similar to product
Product information "FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series"
This intelligent pump of the UI-22 series is now being replaced by the intelligent pump of the UI-32 series. However, spare parts for the UI-22 series are still available.
Features
- Pulses reduced to absolute minimum making low flow rate pumping possible
- Bubble problems greatly reduced
- Long life plunger seal
- Upper and lower pressure limiters
- Space-saving compact design
- Control with RS232C protocol
- Choose SUS, PEEK, or PCTFE to fit your solvent
Part number UI-22-110S UI-22-110P UI-22-110D UI-22-410S UI-22-410P UI-22-410D Pumphead material SUS PEEK PCTFE SUS PEEK PCTFE Max pressure* 35 MPa (5075 psi) 20 MPa (2900 psi) 2 MPa (290 psi) 5 MPa (725 psi) 5 MPa (725 psi) 2 MPa (290 psi) Flow rate range** 0.001 - 9.999 mL/min 0.01 - 99.99 mL/min Flow per stroke 80 μL 708 μL Plunger stroke 10 mm Flow accuracy <, 0.3 % Features Active pulse reduction, upper/lower pressure limiters Pressure accuracy <, 5 % Wetted materials SUS: Sapphire, Ruby, PTFE, PCTFE, PFA, FFKM, HDPE, PEEK, SUS PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK PCTFE: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM Remote control Input:PUMP ON / OFF, Output:Error signal Communication RS232C , RS485(between FLOM devices) Dimensions 144 (H) × 105 (W) × 240 (D) mm, excluding protuberances Weight Approx. 5.6 kg Power AC100 - 240 V(50 / 60 Hz) MAX140 VA *: Maximum pressure is only sustained intermittently.
**: Maximum output is not sustainable over long periods of time.
Properties "FLOM Intelligent pump PEEK 80 μL is replaced bys UI-32 series"
| Material: | PEEK |
|---|---|
| Max. Flow Rate: | 10 mL/min., 10 mL/min. |
| Max. Pressure: | 20 MPa / 2900 psi |