Single Plunger Pump (without Pressure Sensor)/PCS Pump SP-21 Series
Skip image gallery
Picture similar to product
Regular price:
€2,600.00
Product number:
FL-SP-21-33S
This pump series is being replaced by the FLOM SP-21 and SP 31 series.
Features:
*1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.
*2: The unit cannot run continuously at maximum flow rate.
*3: In set volume dispensing mode, when the set volume has been dispensed, pumping automatically stops.
Features:
- Can choose Quick Return mode for Pulse Control
- Reasonable price without equipping pressure sensor
- 10 separate configurations of flow range/pumphead material
- RS232C control protocol
| Part number | SP2102 S | SP2102 P | SP2112 S | SP2112 P | SP2113 S | SP2113 P | SP2132 P | SP2132 P | SP2133 P | SP2133 P |
|---|---|---|---|---|---|---|---|---|---|---|
| Pumphead material | SUS | PEEK | SUS | PEEK | SUS | PEEK | SUS | PEEK | SUS | PEEK |
| Max pressure * 1 | 20 MPa (2900 psi) | 10 MPa (1450 psi) | 5 MPa (725 psi) | 2 MPa (290 psi) | ||||||
| Flow rate range * 2 | 0.001 ~ 1.000 mL/min | 0.01 - 2.00 mL/min | 0.1 - 5.0 mL/min | 0.1 - 10.0 mL/min | 0.1 - 20.0 mL/min | |||||
| Flow per stroke | 8 µL | 16 µL | 32 µL | 77 µL | 154 µL | |||||
| Plunger stroke | 2 mm | 4 mm | 2 mm | 4 mm | ||||||
| Flow accuracy | ± 0.5 % | |||||||||
| Features | Set volume dispensing * 3 | |||||||||
| Pressure accuracy | - | |||||||||
| Wetted materials | SUS: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, SUS | |||||||||
| PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK | ||||||||||
| Remote control | Input: PUMP ON / OFF, Output: Error signal | |||||||||
| Communication | RS232 C | |||||||||
| Dimensions | 144 (H) × 79 (W) × 285 (D) mm, excluding protuberances | |||||||||
| Weight | Approx. 3.0 kg | |||||||||
| Power | AC100 - 240 V (50 / 60 Hz) MAX 80 VA | |||||||||
*1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.
*2: The unit cannot run continuously at maximum flow rate.
*3: In set volume dispensing mode, when the set volume has been dispensed, pumping automatically stops.
| Material: | SS |
|---|---|
| Max. Flow Rate: | 20 mL/min. |
| Max. Pressure: | 2 MPa / 290 psi |