Replacement High Pressure Plunger Seal. Found in Pump Heads on ACQUITY Quaternary Solvent Managers and ACQUITY UPLC Binary and Isocratic and NanoACQUITY Solvent Managers. Also found in UPC2 Convergence Manager
Tubing Cutter provided with three cutting blades for cutting 1/16 inch Stainless Steel tubing. Additional cutting blades purchasable via WAT022385.
This 1/2 µm filter insert assembly fits into the 5000psi and 10,000psi nanoACQUITY system.
This is a genuine authentic Waters™ Quality Part.
Replacement Pinch Valve for QDa with Serial prefix KAB. This Pinch Valve is situated outside the QDa.
John Guest type single check valve for 10mm OD tubing
Replacement 10 ul Smart Syringe (Liquid). This Syringe is specific to the GC-PAL 3.
Replacement 10 µL Syringe. This is an optional syringe for the HDX Automation Manager
Replacement 100 µL Syringe. This is an optional syringe for the HDX Automation Manager
Replacement 100µL Syringe. This Syringe is for the Dynamic Load Wash on a 2777 autosampler.
This is a genuine authentic Waters™ Quality Part.
The Waters™ Performance Maintenance Kit for the 1515 isocratic pump contains all the Waters Quality Parts necessary to keep your instrument operating at peak performance on an annual basis. The Waters™ Performance Maintenance Kit includes the following parts: Two Clear-100 Seals, two sapphire plungers, four PerformancePLUS cartridges, one reference valve rebuild kit, and one solvent filter.
The Waters™ Performance Maintenance Kit for the 1525EF pump contains all the Waters Quality Parts necessary to keep your instrument operating at peak performance on an annual basis. The Waters™ Performance Maintenance Kit for the 1525EF includes the following parts: four plunger seals, four extended flow plungers, two extended flow check valve kits, two outlet check valve kits, one reference valve rebuild kit, and two solvent filters.
The 1525EF Plunger Seal helps maintain the pressure in the pump head. A damaged plunger seal will result in leaking from the pump head and needs to be replaced immediately.
The Waters™ Performance Maintenance Kit for the 1525 micro pump contains all the Waters Quality Parts necessary to keep your instrument operating at peak performance on an annual basis. The Waters™ Performance Maintenance Kit includes the following parts: two seal kits, four sapphire plungers, five check valves (package of 2), one rotor seal, and two solvent filters.
Replacement set of stainless steel tubing assemblies for the 1525 Micro Binary Pump. Kit contains all the external tubing assemblies that would need to be replaced.
The Waters™ Performance Maintenance Kit for the 1525 binary pump contains all the Waters Quality Parts necessary to keep your instrument operating at peak performance on an annual basis. The Waters™ Performance Maintenance Kit includes the following parts: Four Clear-100 Seals, four sapphire plungers, eight PerformancePLUS cartridges, one reference valve rebuild kit, and two solvent filters.
Replacement set of stainless steel tubing assemblies for the 1525 Binary Pump. Kit contains all the external tubing assemblies that would need to be replaced.
Replacement set of stainless steel tubing assemblies for the 1525 Extended Flow Binary Pump. Kit contains all the external tubing assemblies that would need to be replaced.
Replacement Stainless Steel Pump Head. Used on ACQUITY Binary, Isocratic and Quaternary Solvent Managers. Also used on NanoACQUITY Solvent Managers.
Rebuild kit for a 2 position 6 portfluidics valve utilised on a ZQ mass spectrometer.
Replacement stainless steel 2-position, 10-port motorized valve. It switches to direct the flow between prep columns when a regeneration pump is part of the system. Urilised in the System Fluidics Organiser as part of a purification system.
This is a genuine authentic Waters™ Quality Part.
Replacement Syringe, 2.5 mL used in Alliance 2695 Dissolution Transfer Module