Product No.Product NameSpecificationsUnits/pck MaterialTubing SizeThread SizeMax. Pressure FL-9620Dual-Fitt SETSUS316/PEEKOD 1/16"No.10-32UNF140 Mpa (20.300 psi)10 FL-9621Dual-FittingSUS316OD 1/16"No.10-32UNF10 FL-9623-05Replacement FerruleSUS316/PEEKOD 1/16"-5 FL-9623-10Replacement FerruleSUS316/PEEKOD 1/16"-10 FL-95011/16" Fitting SSUS316OD 1/16"No.10-32UNF40 Mpa (5.800 psi)10 FL-95021/16" Fitting LSUS316OD 1/16"No.10-32UNF10 FL-96011/16" FerruleSUS316OD 1/16"-10 FL-9935S1/16" Single Lock Fitting SSUS316/PEEKOD 1/16"No.10-32UNF50 Mpa (7.250 psi)10 FL-9935P1/16" Single Lock Fitting PPEEKOD 1/16"No.10-32UNF40 Mpa (5.800 psi)10 FL-9001Easy Fitt OD 10 mmPEEKOD 1/16"No.10-32UNF20 Mpa (2.900 psi)10 FL-9002Easy Fitt OD 12 mmPEEKOD 1/16"No.10-32UNF10 FL-9130Easy Fitt Type 2PEEKOD 1/16"No.10-32UNF10 FL-9004Stop FittPEEKOD 1/16"No.10-32UNF10 FL-9003Hex FittPEEKOD 1/16"No.10-32UNF40 Mpa (5.800 psi)10 FL-9135Hex Fitt MiniPEEKOD 1/16"No.10-32UNF10

Specification: No.10-32UNF, PCTFEStandard Combination: UI-22-110DIndex (9): UI-22-110D

Spezifikation: OEM: Waters® Model: Alliance® 2695 Sample ManagerKompatibilität: Alliance® and Alliance® 2695 Sample ManagerOEM: 700011456

For all common syringe pumps

Used and refurbished to manufacturers specifications Sensitive results for drug developmentRobust, high-throughput efficiencyLow detection limits for trace analysisHigh-quality results for quantitation and precise identification of low abundance compounds, even in matrices like clinical samples, pesticide/drug residues, forensic toxicology samples and environmental samples Mass Accuracy / Stability 0.1 Da over 8 hours, 0.15 Da over 24 hoursMass Range 5-3,000Polarity Switching Time 700 msScan Speed (Quad) 24,000 Da/secScan Types Q1 MS, Q3 MS, Product Ion, Precursor Ion, Neutral Loss or Gain, MRMSensitivity MRM Mode 200 fg Reserpine on column: S/N > 1,200, C.V. < 5%

SäulenformatAnalysesäule, NanoViper Durchmesser (metrisch)0,050 mm Länge (metrisch)150 mm Max. Druck11.600 psi (800 bar) Partikelgröße2 μm pH2 bis 8 Porengröße100 Å Oberfläche450 m²/g Temperatur60 °C USP-TypL1 Stationäre PhaseC18 ProduktlinienanoLC VerpackungsmaterialSilika, kugelförmig, vollporös, ultrarein Kohlenstoffbeladung15 % SäulentypUmkehrphase Endverkappt/mit EndgruppenJa PhaseUmkehrphase MaterialQuarzglas TypAnalysesäule, NanoViper Unit SizeEach

Upgrade your HP/Agilent 1100 degasser with a new vacuum system and smaller dead volume.480µl dead volume per chamber for fast eluent changeAlternatively available with 670µl or 925µl dead volume per chamber for increased performanceInstallation in only approx. 20 minutesImproved ZHCR vacuum pump (Zero Hysteresis Constant Run)The kit consists of:Pre-assembled unit with 4 vacuum chambers, vacuum pump, and control electronicsConnection cable for power supplyDetailed installation instructionsGeneral specifications:Degasser hose material: Teflon® AFDegasser chamber maximum pressure: 70 PSIG (priming pressure)Wetted materials: Teflon® AF, PEEK, and TefzelDegasser housing: PPS (polyphenylene sulfide) and stainless steelTranslated with DeepL.com (free version)

Upgrade your HP/Agilent 1100 degasser with a new vacuum system and smaller dead volume.100µl dead volume per chamber for fast eluent changeInstallation in only approx. 20 minutesImproved ZHCR vacuum pump (Zero Hysteresis Constant Run)The kit consists of:Pre-assembled unit with 4 vacuum chambers, vacuum pump, and control electronicsConnection cable for power supplyDetailed installation instructionsGeneral specifications:Degasser hose material: Teflon® AFDegasser chamber maximum pressure: 70 PSIG (priming pressure)Wetted materials: Teflon® AF, PEEK, and TefzelDegasser housing: PPS (polyphenylene sulfide) and stainless steel

Upgrade your HP/Agilent 1100/1200 degasser with a new vacuum system and smaller dead volume.GPC compatibleInstallation takes only about 20 minutesImproved ZHCR vacuum pump (Zero Hysteresis Constant Run)The kit consists of:Pre-assembled unit with 4 vacuum chambers, vacuum pump, and control electronicsConnection cable for power supplyDetailed installation instructions

Upgrade your HP/Agilent 1100/1200 degasser with a new vacuum system and smaller dead volume.480µl dead volume per chamber for fast eluent changeAlternatively available with 670µl or 925µl dead volume per chamber for increased performanceInstallation in only approx. 20 minutesImproved ZHCR vacuum pump (Zero Hysteresis Constant Run)The kit consists of:Pre-assembled unit with 4 vacuum chambers, vacuum pump, and control electronicsConnection cable for power supplyDetailed installation instructionsGeneral specifications:Degasser hose material: Teflon® AFDegasser chamber maximum pressure: 70 PSIG (priming pressure)Wetted materials: Teflon® AF, PEEK, and TefzelDegasser housing: PPS (polyphenylene sulfide) and stainless steel

Specification: 316 SS, 304 SS, Carbon-filled PTFE, Vespel, PEEK, PTFE, Sintered Glass, PP, GoldCompatibility: 1100, G1310A, G1311A, G1313A, G1329AOEM: 01100-68000This kit contains:Black Piston Seals, 2/pk (CTS-10417)Rotor Seal, Vespel, 2-Groove (CTS-10459)Needle Assembly (CTS-10835)PTFE Frits, 5/pk (CTS-10683)Seal Cap Assembly (CTS-A11454)Frit Adapter, 4/pk (CTS-21069)Glass Solvent Filter (CTS-10843)Needle Seat (11-2605)

Binäre Gradientenpumpe mit Degasser, max. 600 barVialsampler, p max. 600 bar - ohne ThermostatSäulenofen, max 80°C, 6µL Totvolumen, für 1 Säule max. 25cmDAD Detektor G1315D, 80 Hz mit Standard Flusszelle G1315-60022Accessory Kit G4290-68755NEU, Ausstellunggsstück, Listenpreis: 56.000 EUR netto (Dez. 2022)

!! Residual stock !!Equivalent to 5190-0917for G4212A/B, G7117A/B/C and G7100 CElong-life deuterium lamp, 8 pin, for Agilent G4212A/B, G7117A/B/C and G7100 CE

Specification: Vespel, 316 SSOEM: 5068-0007

Specification: Vespel, 316 SSOEM: 0101-1416

The Agilent G2614A ALS is a 100-position autosampler tray module. The tray can be used together with the G2613A injector for various Agilent GC systems, such as the 6890Plus and 6890N. The G2614A is part of the 7683B ALS module.All our devices are tested, cleaned, and inspected before delivery.Device in stock, available 6–8 weeks after receipt of order.

Specification: Sapphire, Ruby, Gold, Ceramic, 316 SSCompatibility: 1050, 1100, 1200, G1311COEM: 5062-8562

Specification: Sapphire, Ruby, Gold, Ceramic, 316 SSCompatibility: 1260, G1310B, G1311B G1312BOEM: G1312-60020

Specification: 316 SS, PTFE TubingCompatibility: Agilent 1100, 1200, 1260 OEM Nr.: G1313-87304

Specification: OEM: Agilent® Model: 1260, 1290OEM: 5067-4656