FLOM Switching Delivery Pump, PCTFE/Ceramic
Skip image gallery
Picture similar to product
€2,300.00
Product number:
FL-DP-11
A single unit controlling high accuracy flow in multiple flow paths.
A new concept in multi-purpose pumps from FLOM. This smart pump can either dispense up to 5 separate channels, or continuously dispense just 1 channel, all in one device.
- Check valve-less design
- Can set flow to multiple paths
- High chemical resistance
- High accuracy flow volume
- Superior reliability
A new concept in multi-purpose pumps from FLOM. This smart pump can either dispense up to 5 separate channels, or continuously dispense just 1 channel, all in one device.
- Check valve-less design
- Can set flow to multiple paths
- High chemical resistance
- High accuracy flow volume
- Superior reliability
| Product Name | Switching Delivery Pump | |
| Part Number | FL-DP-11 | |
| Pump Mechanism | Concentric Revolving Control Piston/Reciprocating Method | |
| Pump Flow Modes | Measuring mode, Continuous flow mode, | |
| One-shot flow mode *when remote controlled | ||
| Ports | 6 | |
| Measuring Volume Settings | 0.001- 9.999 mL | |
| 0.01 - 99.99 mL | ||
| 0.1 -999.9 mL | ||
| 1 -9999 mL | ||
| any of the above selectable | ||
| 0.001 - 9999.999mL *when remote controlled | ||
| Flow Rate Settings | Continuos flow | 0.1 - 10.0 mL/min (8 mm stroke) |
| 0.1 - 6.0 mL/min (4 mm stroke) | ||
| One-shot flow | 0.1 - 25.0 mL/min *when remote controlled | |
| Maximum Pressure | 0.5 MPa or less | |
| Volume per Stroke | 300 µL (8 mm stroke) | |
| Measuring Mode | Accuracy | ± 1.0 % or ± 0.01 mL or less, whichever is greater |
| Repeatability | 0.1 % RSD or 0.001 mL SD or less, whichever is greater | |
| Continuous flow Mode | Accuracy | ± 2.0 % or less, only when pumping1 mL/min or higher |
| Repeatability | 0.1 % RSD or 0.005 minutes SD or less, whichever is greater | |
| Special Functions | Variable piston stroke (8 mm / 4 mm) | |
| Piston quick movement ( suction / discharge) | ||
| Flow volume correction | ||
| Port Type | 1/4-28 UNF | |
| Connecting Tube Diameters | 1/8” , 3.0 mm , 2.0 mm , 1/16” | |
| Wetted Materials | Ceramic, PCTFE, PTFE, FFKM | |
| Remote Control Signals | Measuring: start measuring, end measuring | |
| Continuous flow: start continuous, error | ||
| either one of the above sets | ||
| Dimensions | 144 (H) x 79 (W) x 240 (D) mm, excluding protuberances | |
| Weight | Approx. 2.4 kg | |
| Power | AC 100 - 240 V (50 / 60 Hz) , MAX 80 VA | |