for Waters Alliance DegasserAlliance 2690/95, Alliance 2697 HTDelivery without degasser chambersThe corresponding degassing chamber is available under item no. 9000-1004 (480 ul), 9000-1184 (480 ul for GPC), 9000-1006 (670 ul) or 9000-1009 (925 ul) and must be ordered separately.
The ESI Liner Tube supports the stainless steel capillary when used in the MS sample.The corresponding steel capillaries are available under the article numbers EP-700000341 and 700004206 and should therefore be ordered separately. The respective compatibility of the corresponding steel capillary can be found in the product description under the corresponding article number.
The 3V lithium battery is found on the CPU board and backs up the static RAM. The battery is not rechargeable but is easily replaced.Shipment via mail within the EU only due to hazardous contents.
O-Ring seal for ESI/APCI probe shaft to desolvation heater unit. Should be replaced if your probe plugs in without resistance.Equivalent to Waters part no.: 5711281Compatibility:100MD 1000,LCTQ-Tof IIQ-Tof 1Q-Tof UltimaQ-Tof MicroQuattro LCQuattro MicroQuattro PremierQuattro Premier XEQuattro UltimaSQDTQDZMDZQ Mass Spectrometers
Equivalent to Waters part no.: 700000904Compatibility:EMD 1000 Mass SpectrometerSYNAPT G2 HDMS SystemSYNAPT G2 MS SystemXEVO Q-Tof Mass SpecXEVO TQ MS, ZQ Mass Spectrometer
The 3 cc Oasis HLB cartridges contain Oasis HLB sorbent, a universal polymeric reverse-phase sorbent designed for the extraction of a wide range of acidic, basic, and neutral compounds from various matrices using a simple, generic protocol. Since the Oasis HLB sorbent is water-wettable, it retains its ability to provide higher retention and excellent recovery even when the sorbent runs dry. This means that no exceptional measures need to be taken to prevent the sorbent beds from drying out during the critical steps prior to sample loading. These syringe barrel cartridges are designed for use with vacuum manifolds and automated SPE devices.
The corresponding bracket for this degasser chamber is available under article no. 725000145.The MINI Degassing Chamber is the ideal solution to keep bubbles out of fluidic systems and liquid chromatography pumps and ensure a stable baseline. Systec(R) AF is compatible with a wide range of typical organic solvents used in HPLC and offers a chemically inert flow path.Additional information
Chemical CompatibilitySee Solvent Compatibility Chart
Height (in)0.5
Length (in)2.48
Liquid Connections1_4-28 UNF
Max Flow Rate (mL/min)10
Membrane TypeSystec AF
Recommended Flow Rate (ml/min)3
Tubing ID (in)0.045
Tubing ID (mm)1.143
Vacuum ConnectionBarb connector for 1/8 ID elastomeric Tubing
Vacuum Performance43% O2 Remaining at 2ml/min 50mmHg Vacuum
Wetted MaterialsSystec AF, PEEK and Glass-filled PTFE
Width (in)1.75
The MINI Degassing Chamber is the ideal solution to keep bubbles out of fluidic systems and liquid chromatography pumps and ensure a stable baseline. Systec(R) AF is compatible with a wide range of typical organic solvents used in HPLC and offers a chemically inert flow path.The corresponding bracket for this degasser chamber is available under part no. 725000145.ADDITIONAL INFORMATION
Chemical CompatibilitySee Solvent Compatibility Chart
Height (in)0.5
Length (in)2.48
Liquid Connections1_4-28 UNF
Max Flow Rate (mL/min)10
Membrane TypeSystec AF
Pressure Rating Max (psi70
Recommended Flow Rate (ml/min)6
Tubing ID (in)0.045
Tubing ID (mm)1.143
Vacuum ConnectionBarb connector for 1/8 ID elastomeric Tubing
Wetted MaterialsSystec AF, PEEK and Glass-filled PTFE
Width (in)1.75
Volume Per Channel uL925
The corresponding bracket for this degasser chamber is available under article no. 725000145.The MINI Degassing Chamber is the ideal solution to keep bubbles out of fluidic systems and liquid chromatography pumps and ensure a stable baseline. Systec(R) AF is compatible with a wide range of typical organic solvents used in HPLC and offers a chemically inert flow path.ADDITIONAL INFORMATION
Chemical CompatibilitySee Solvent Compatibility Chart
Height (in)0.5
Length (in)2.48
Liquid Connections1_4-28 UNF
Membrane TypeSystec AF
Pressure Rating Max (psi)70
Recommended Flow Rate (ml/min)3
Tubing ID (in)0.045
Tubing ID (mm)1.143
Vacuum ConnectionBarb connector for 1/8 ID elastomeric Tubing
Vacuum Performance43% O2 Remaining at 2ml/min 50mmHg Vacuum
Wetted MaterialsSystec AF, PPS, Glass, filled PTFE, Stainless Steel
Width (in)1.75''
Replaces Waters part no.: 700001929Compatibility:3100 Mass DetectorEMD 1000 Mass SpectrometerLCT PremierLCT Premier XEQ-Tof Premier Mass SpectrometerQuattro Premier Mass SpectrometerQuattro Premier XE Mass SpectrometerQuattro micro Mass SpectrometerSYNAPT MSSingle Quad DetectorSynapt High Definition MS SystemTandem Quadrupole DetectorZQ Mass Spectrometer
