FeaturesProvides consistent pressure by tracking variable pump pressure in real timeUI Series provides stable flow, BP-11 maintains set pressure  Product NameAuto Backpressure Regulator BP-11 Series Product No.BP-11SBP-11D Wetted materialsSUS316Teflon (PCTFE) Max Pressure5 Mpa (725 psi) Max Flow Rate100 mL/min. Path Diameter0.6 mm Setup Pressure Range0.10 - 5.00 MPa (14.5 - 725 psi)  Pressure Signal RangeUses pressure signal from UI / MP pumps [ DC1 - 5V ]  Pressure Accuracy± 0.1 MPa (± 14.5 psi) FeaturesManual mode, Auto-stop  Remote controlInput: Start / Stop, Output: FUNC RS232C , RS485 (between FLOM devices) Dimensions144 (H) × 79 (W) × 240 (D) mm , excluding protuberances  Weight Approx. 2.7 kg Power AC1000 - 240V (50 / 60 Hz) , MAX 70 VA

Intelligent Micro Pump MP-22Valve Switching Micro PumpCheck valve-less design for super low pulse control under low flow ratesFeaturesImproved near-zero pulse flowProblems with bubble greatly reducedEasy setupUpper and lower pressure limitersSpace-saving compact designExternal control available with RS232C protocol Part numberMP-22-110S Pumphead materialSUS Max pressure*35 MPa (5075 psi) Flow rate range**0.001 - 9.999 mL/min Flow per stroke80 µL Plunger stroke10 mm Flow accuracy***< 0.3 % FeaturesActive pulse reduction, upper/lower pressure limiters Pressure accuracy< 5 % Wetted materialsSapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK, SUS Remote controlInput:PUMP ON / OFF, Output:Error signal CommunicationRS232C, RS485(between FLOM devices) Dimensions150 (H) ×, 160 (W) ×, 280 (D) mm, excluding protuberances WeightApprox. 6.7 kg PowerAC100 - 240 V (50 / 60 Hz) MAX 140 VA *: Maximum pressure is only sustained intermittently.**: Maximum output is not sustainable over long periods of time.***: Using Methanol at flow rate10~500&mu,L/min , output pressure >, 1 MPa ~ 20MPa

Intelligent Micro Pump MP-32 SeriesUses FLOM’s unique configuration of switching valve and linear-drive pumpFeatures•  Improved near-zero pulse flow•  Problems with bubbles greatly reduced•  Long life plunger seal•  Upper and lower pressure limiters•  Space-saving compact design•  Control with RS232C communication protocol  Product NameIntelligent Micro Pump Product No.FL-MP-32-110SFL-MP-32-110P Pump head materialSUS316PEEK Max pressure*140 MPa (5800 psi)20 MPa (2900 psi) Flow rate range*20.1 - 500.0 μL/Min Flow per stroke80 μL Plunger stroke10 mm Flow repeatability*2< 0.3 % RSD (10 - 250 μL/Min) Flow accuracy*2±2.0 % or ±2 μL/Min or less, whichever is greater (at 250 μL or the lower) Flow modeContinuous flow mode , Timer flow mode Safety FunctionUpper/lower pressure limiters  Pressure Accuracy±0.2 MPa (±29 psi) Wetted materials Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, ELGILOY®*³, PEEK, SUS316 Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, PEEK Remote controlInput: START/STOP , Output: ERROR / FUNC (either one of READY / END / RUN) DC1-5V Input: Flow rate setup , DC1-5V output：Pressure signal CommunicationRS232C / RS485 (between FLOM devices) Dimensions150 (H) × 150 (W) × 240 (D) mm , excluding protuberances WeightApprox. 5.1 kg Power AC100 ~ 240V (50 / 60 Hz) , MAX 250 VA Environment temperature5 ~ 40 ℃ , 20 ~ 80 % RH (Non-condensing) *1: Maximum pressure is only sustained intermittently, this does not mean maximum pressure under continuous use.*2: Test data generated under FLOM’s standard test conditions.*3: ELGILOY® is a registered trademark of the Elgiloy Specialty Metals.

Intelligent Micro Pump MP-32 SeriesUses FLOM’s unique configuration of switching valve and linear-drive pumpFeatures•  Improved near-zero pulse flow•  Problems with bubbles greatly reduced•  Long life plunger seal•  Upper and lower pressure limiters•  Space-saving compact design•  Control with RS232C communication protocol  Product NameIntelligent Micro Pump Product No.FL-MP-32-110SFL-MP-32-110P Pump head materialSUS316PEEK Max pressure*140 MPa (5800 psi)20 MPa (2900 psi) Flow rate range*20.1 - 500.0 μL/Min Flow per stroke80 μL Plunger stroke10 mm Flow repeatability*2< 0.3 % RSD (10 - 250 μL/Min) Flow accuracy*2±2.0 % or ±2 μL/Min or less, whichever is greater (at 250 μL or the lower) Flow modeContinuous flow mode , Timer flow mode Safety FunctionUpper/lower pressure limiters  Pressure Accuracy±0.2 MPa (±29 psi) Wetted materials Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, ELGILOY®*³, PEEK, SUS316 Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, PEEK Remote controlInput: START/STOP , Output: ERROR / FUNC (either one of READY / END / RUN) DC1-5V Input: Flow rate setup , DC1-5V output：Pressure signal CommunicationRS232C / RS485 (between FLOM devices) Dimensions150 (H) × 150 (W) × 240 (D) mm , excluding protuberances WeightApprox. 5.1 kg Power AC100 ~ 240V (50 / 60 Hz) , MAX 250 VA Environment temperature5 ~ 40 ℃ , 20 ~ 80 % RH (Non-condensing) *1: Maximum pressure is only sustained intermittently, this does not mean maximum pressure under continuous use.*2: Test data generated under FLOM’s standard test conditions.*3: ELGILOY® is a registered trademark of the Elgiloy Specialty Metals.

This intelligent pump of the UI-22 series is now being replaced by the intelligent pump of the UI-32 series. However, spare parts for the UI-22 series are still availableFeaturesPulses reduced to absolute minimum making low flow rate pumping possibleBubble problems greatly reducedLong life plunger sealUpper and lower pressure limitersSpace-saving compact designControl with RS232C protocolChoose SUS, PEEK, or PCTFE to fit your solvent  Part numberUI-22-110SUI-22-110PUI-22-110DUI-22-410SUI-22-410PUI-22-410D Pumphead materialSUSPEEKPCTFESUSPEEKPCTFE Max pressure*35 MPa (5075 psi)20 MPa (2900 psi)2 MPa (290 psi)5 MPa (725 psi)5 MPa (725 psi)2 MPa (290 psi) Flow rate range**0.001 - 9.999 mL/min0.01 - 99.99 mL/min Flow per stroke80 μL708 μL Plunger stroke10 mm Flow accuracy<, 0.3 % FeaturesActive pulse reduction, upper/lower pressure limiters Pressure accuracy<, 5 % Wetted materialsSUS: Sapphire, Ruby, PTFE, PCTFE, PFA, FFKM, HDPE, PEEK, SUS PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK PCTFE: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM Remote controlInput:PUMP ON / OFF, Output:Error signal CommunicationRS232C , RS485(between FLOM devices) Dimensions144 (H) × 105 (W) × 240 (D) mm, excluding protuberances WeightApprox. 5.6 kg PowerAC100 - 240 V(50 / 60 Hz) MAX140 VA *: Maximum pressure is only sustained intermittently.**: Maximum output is not sustainable over long periods of time.

Features  Product NameHigh Pressure DamperMedium Pressure DamperLow Pressure Damper Product NumberFL-9810FL-9805FL-9800 Max Pressure20MPa10MPa2MPa Pulse Control Range8～12MPa0.5 ～ 5 MPa0.1～0.7MPa Internal Volumemax.3.5mlmax. 0.8 mL Wetted MaterialsPEEK, PTFEPEEK, FEP Port TypeNo.10-32UNF DimensionsDiameter 50mm × Length 36.5mmDiameter 45mm × Length 150mmDiameter 45mm × Length 33mm Weightmax.0.3kg

Great for plunger pump cleaning and basic pumping applicationsFeatures:Space-saving compact designTubes can be selected according to the solvent usedTube cassette can be set in four directions  Product NameRoller Pump ModelWP-21 Flow rate range4-stage variable (approx. 0.5・1.0・2.0・3.0mL/min) Flow Rate Switching  4-stage via front switch (rotary type) Special Function Purge delivery via long press of front switch (approx. 5mL/min) Flow Accuracy± 5 % (PharMed®BPT*¹ when new) Discharge Pressure 90 kPa or less (PharMed®BPT*¹) Suction Pressure-90 kPa or less (PharMed®BPT*¹) Operating Liquid Temperature Range 5 to 50°C Rotation DirectionClockwise when viewed from front External Input/Output Signals Input: Conductive OFF, Open ON   Output: Error output via open collector Tube MaterialPharMed®BPT*¹ / FLURAN F-5500-A / Transmaster TM-15 Dimensions 65 (H) × 46 (W) × 110 (D) mm, excluding protrusions WeightApprox. 0.5 kg Power DC 24 V, MAX 15 W (AC adapter included) *1 “PharMed®BPT” is a registered trademark of Saint-Gobain K.K.* Standard specifications use “PharMed®BPT” tubing. Please inquire if you require “Fulan F-5500-A” or "TransMasterTM-15”. * Turning the power switch ON automatically initiates fluid delivery.

Features  Product NameSide Panel Product NumberFL-4512FL-4513FL-4514 Pump TypeUI Series, MP Series, SP Series, DP-11 Attachable PartsVI-11, VI-12, MI-11,V05V200, V201, V204, V239, V512 Damper Attachableyesnoyes Dimensions144(H)×60(W)×44(D), excluding protuberances The valves shown in the picture are not included in the scope of delivery and must be ordered separately under the following article numbers:  Product NumberFL-V200FL-V201FL-V204FL-V512FL-V239FL-V05 Type6 port 2 position3 port 2 way2 port selection6 port 2 position Max Pressure20MPa (2900psi)30MPa (4350psi)1MPa (145psi)35 Mpa (5800 psi) Wetted MaterialsPEEKSUS, PEEKPEEKSUS, PEEK Tube OD1/16"ø3, 1/8"1/16" Path Diameter0.6mm (0.024")0.8mm (0.03")0.8mm (0.03")1.0mm (0.04")0.6 mm Thread SizeNo.10-32UNF1/4-28UNFNo.10-32UNF

Features  Product NameSide Panel Product NumberFL-4512FL-4513FL-4514 Pump TypeUI Series, MP Series, SP Series, DP-11 Attachable PartsVI-11, VI-12, MI-11,V05V200, V201, V204, V239, V512 Damper Attachableyesnoyes Dimensions144(H)×60(W)×44(D), excluding protuberances The valves shown in the picture are not included in the scope of delivery and must be ordered separately under the following article numbers:  Product NumberFL-V200FL-V201FL-V204FL-V512FL-V239FL-V05 Type6 port 2 position3 port 2 way2 port selection6 port 2 position Max Pressure20MPa (2900psi)30MPa (4350psi)1MPa (145psi)35 Mpa (5800 psi) Wetted MaterialsPEEKSUS, PEEKPEEKSUS, PEEK Tube OD1/16"ø3, 1/8"1/16" Path Diameter0.6mm (0.024")0.8mm (0.03")0.8mm (0.03")1.0mm (0.04")0.6 mm Thread SizeNo.10-32UNF1/4-28UNFNo.10-32UNF  

Features  Product NameSide Panel Product NumberFL-4512FL-4513FL-4514 Pump TypeUI Series, MP Series, SP Series, DP-11 Attachable PartsVI-11, VI-12, MI-11,V05V200, V201, V204, V239, V512 Damper Attachableyesnoyes Dimensions144(H)×60(W)×44(D), excluding protuberances The valves shown in the picture are not included in the scope of delivery and must be ordered separately under the following article numbers:  Product NumberFL-V200FL-V201FL-V204FL-V512FL-V239FL-V05 Type6 port 2 position3 port 2 way2 port selection6 port 2 position Max Pressure20MPa (2900psi)30MPa (4350psi)1MPa (145psi)35 Mpa (5800 psi) Wetted MaterialsPEEKSUS, PEEKPEEKSUS, PEEK Tube OD1/16"ø3, 1/8"1/16" Path Diameter0.6mm (0.024")0.8mm (0.03")0.8mm (0.03")1.0mm (0.04")0.6 mm Thread SizeNo.10-32UNF1/4-28UNFNo.10-32UNF

This pump series is being replaced by the FLOM SP-21 and SP 31 series.Features:Can choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Part numberSP-21-02SSP-21-02PSP-21-12SSP-21-12PSP-21-13SSP-21-13PSP-21-32PSP-21-32PSP-21-33PSP-21-33P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max pressure*120 MPa (2900 psi)10 MPa (1450 psi)5 MPa (725 psi)2 MPa (290 psi) Flow rate range*20.001 ~ 1.000 mL/min0.01 - 2.00 mL/min0.1 - 5.0 mL/min0.1 - 10.0 mL/min0.1 - 20.0 mL/min Flow per stroke8 µL16 µL32 µL77 µL154 µL Plunger stroke2 mm4 mm2 mm4 mm Flow accuracy±, 0.5 % FeaturesSet volume dispensing*3 Pressure accuracy- Wetted materialsSUS: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, SUS PEEK: Sapphire, Ruby, PTFE, PCTFE, PFA, ETFE, FFKM, HDPE, PEEK Remote controlInput:PUMP ON / OFF, Output:Error signal CommunicationRS232C Dimensions144 (H) ×, 79 (W) ×, 285 (D) mm, excluding protuberances WeightApprox. 3.0 kg PowerAC100 - 240 V (50 / 60 Hz) MAX 80 VA *1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.*2: The unit cannot run continuously at maximum flow rate.*3: In set volume dispensing mode, when the set volume has been dispensed, pumping automatically stops. 

PCS Pump SP-32 series.Single plunger pump with pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.

Single Plunger Pump SP-32 seriesSingle plunger pump without pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only maintained intermittently. Continuous pumping at maximum pressure cannot be guaranteed. 

Single Plunger Pump SP-32 seriesSingle plunger pump without pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only maintained intermittently. Continuous pumping at maximum pressure cannot be guaranteed.

Single Plunger Pump SP-32 seriesSingle plunger pump without pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only maintained intermittently. Continuous pumping at maximum pressure cannot be guaranteed. 

PCS Pump SP-32 series.Single plunger pump with pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed. 

Single Plunger Pump SP-32 seriesSingle plunger pump without pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only maintained intermittently. Continuous pumping at maximum pressure cannot be guaranteed.

Single Plunger Pump SP-31 seriesSingle plunger pump without pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol Product no.FL-SP-31-12SFL-SP-31-12PFL-SP-31-13SFL-SP-31-13PFL-SP-31-42SFL-SP-31-42PFL-SP-31-43SFL-SP-31-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa20 Mpa25 Mpa20 Mpa5 Mpa2 Mpa 5075 psi2900 psi3625 psi2900 psi725 psi290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.

PCS Pump SP-32 series.Single plunger pump with pressure sensorFeaturesCan choose Quick Return mode for Pulse ControlReasonable price without equipping pressure sensor10 separate configurations of flow range/pumphead materialRS232C control protocol  Product No.SP-32-12SSP-32-12PSP-32-13SSP-32-13PSP-32-42SSP-32-42PSP-32-43SSP-32-43P Order numberFL-SP-32-12SFL-SP-32-12PFL-SP-32-13SFL-SP-32-13PFL-SP-32-42SFL-SP-32-42PFL-SP-32-43SFL-SP-32-43P Pumphead materialSUSPEEKSUSPEEKSUSPEEKSUSPEEK Max. Pressure*135 Mpa5075 psi20 Mpa2900 psi25 Mpa3625 psi20 Mpa2900 psi5 Mpa725 psi2 Mpa290 psi Max. Flow Rate2,5 mL/Min.5 mL/Min.25 mL/Min.50 mL/Min. *1: Maximum pressure is only sustained intermittently. Continuous pump operation at maximum pressure cannot be guaranteed.

A single unit controlling high accuracy flow in multiple flow paths.A new concept in multi-purpose pumps from FLOM. This smart pump can either dispense up to 5 separate channels, or continuously dispense just 1 channel, all in one device.- Check valve-less design- Can set flow to multiple paths- High chemical resistance- High accuracy flow volume- Superior reliability  Product NameSwitching Delivery Pump Part NumberFL-DP-11 Pump MechanismConcentric Revolving Control Piston/Reciprocating Method Pump Flow ModesMeasuring mode, Continuous flow mode, One-shot flow mode *when remote controlled Ports6 Measuring Volume Settings0.001- 9.999 mL 0.01 - 99.99 mL 0.1 -999.9 mL 1 -9999 mL any of the above selectable 0.001 - 9999.999mL *when remote controlled Flow Rate SettingsContinuos flow0.1 - 10.0 mL/min (8 mm stroke) 0.1 - 6.0 mL/min (4 mm stroke) One-shot flow0.1 - 25.0 mL/min *when remote controlled Maximum Pressure0.5 MPa or less Volume per Stroke300 µL (8 mm stroke) Measuring ModeAccuracy± 1.0 % or ± 0.01 mL or less, whichever is greater Repeatability0.1 % RSD or 0.001 mL SD or less, whichever is greater Continuous flow ModeAccuracy± 2.0 % or less, only when pumping1 mL/min or higher Repeatability0.1 % RSD or 0.005 minutes SD or less, whichever is greater Special FunctionsVariable piston stroke (8 mm / 4 mm) Piston quick movement ( suction / discharge) Flow volume correction Port Type1/4-28 UNF Connecting Tube Diameters1/8” , 3.0 mm , 2.0 mm , 1/16” Wetted MaterialsCeramic, PCTFE, PTFE, FFKM Remote Control SignalsMeasuring: start measuring, end measuring Continuous flow: start continuous, error either one of the above sets Dimensions144 (H) x 79 (W) x 240 (D) mm, excluding protuberances WeightApprox. 2.4 kg PowerAC 100 - 240 V (50 / 60 Hz) , MAX 80 VA