FLOM Intelligent Pump PEEK 718 μL
Skip image gallery
Picture similar to product
Product information "FLOM Intelligent Pump PEEK 718 μL"
Replaces all older models, including the UI-22 series
Features
Features
- Provides ultra-low pulsation continuous flow
- Trouble related to air bubble greatly reduced
- Long life plunger seal
- Space-saving compact design
- Control with RS232C communication protocol
- Choose between SUS; PEEK or PCTFE for your solvent
| <span style="font-family:'Calibri Light', sans-serif;">Model No. | <span style="font-family:'Calibri Light', sans-serif;">UI-32-110S | <span style="font-family:'Calibri Light', sans-serif;">UI-32-110P | <span style="font-family:'Calibri Light', sans-serif;">UI-32-110D | <span style="font-family:'Calibri Light', sans-serif;">UI-32-410S | <span style="font-family:'Calibri Light', sans-serif;">UI-32-410P | <span style="font-family:'Calibri Light', sans-serif;">UI-32-410D | |
| Pump head material | SUS316 | Carbon-reinforced PEEK | PCTFE | SUS316 | Carbon-reinforced PEEK | PCTFE | |
| Max pressure | 40 MPa (5800 psi) | 20 MPa (2900 psi) | 5 MPa (725 psi) | 5 MPa (725 psi) | 5 MPa (725 psi) | 2 MPa (290 psi) |
|
| Flow rate range | 0.001 - 9.999 mL/Min | 0.01 - 99.99 mL/Min | |||||
| Flow per stroke | 80 μL | 718 μL | |||||
| Plunger stroke | 10 mm | ||||||
| Flow repeatability | < 0.3 % RSD (0.100 - 5.000 mL/Min) | < 0.3 % RSD (1.00 - 50.00 mL/Min) | |||||
| Flow accuracy | ±2.0 % or ±2 μL/Min or less, whichever is greater (at 5.000 mL/Min.) | ±2.0 % or ±20 μL/Min or less, whichever is greater (at 50.00 mL/Min.) | |||||
| Outlet tubing specification | OD 1/16" x ID 0.5 mm | OD 1/16" x ID 1.0 mm | OD 1/8" x OD 1/16" | ||||
| Features | Upper/lower pressure limiters, consistent pressure flow mode, timer flow mode | ||||||
| Pressure accuracy | ±0.2 MPa (±29 psi) | ||||||
| Wetted materials | Sapphire, Ruby, PCTFE, PFA, UHMW-PE, Elgiloy, PEEK, SUS | Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, PEEK | Sapphire, Ruby, PCTFE, PFA, PTFE, ETFE, FFKM | Sapphire, Ruby, PCTFE, PFA, UHMW-PE, Elgiloy, PEEK, SUS | Sapphire, Ruby, PCTFE, PFA, UHMW-PE, FFKM, PEEK | Sapphire, Ruby, PCTFE, PFA, PTFE, ETFE, FFKM | |
| Remote control | Input: START/STOP, Output: ERROR / FUNC (either one of READY / END / RUN) DC1-5V Input: Flow rate setup, DC1-5V output<span style="font-family:'MS Gothic';">：Pressure signal |
||||||
| Communication | RS232C / RS485 (between FLOM devices) | ||||||
| Dimensions | 144 (H) x 79 (W) x 240 (D) mm | ||||||
| Weight | Approx. 3.8 Kg | Approx. 3.0 Kg | Approx. 3.8 Kg | Approx. 3.8 Kg | Approx. 3.0 Kg | Approx. 3.8 Kg | |
| Power supply | AC 100 - 240 V(50 / 60 Hz) | ||||||